Nordson VersaBlue VBN 50 Manual page 106

10-4
Options
Option in configuration
code
Programmable controller
(PLC)
Air run-up
Gun solenoid valve control
Temperature sensor
Heat exchanger / ACM
connectivity (ACM = Auxiliary
Control Module = additional
electrical cabinet)
P/N 7146386A
Box Also
available
as
accessory
36 − A: Siemens S7-300
F: A-B ControlLogix with EtherNet/IP and
PanelView
T: A-B ControlLogix with ControlNet and PanelView
37 − 4: 4 outputs
8: 8 outputs
12: 12 outputs
16: 16 outputs
The air run-up assembly automatically regulates
the spray air pressure in the connected guns,
based on the line speed.
38 − G: 24 V
The voltage is controlled via standard I/O.
P: A control unit (e.g. a pattern controller) can be
connected instead of the gun-solenoid valve
controller. (Pattern Control through Gun-Solenoid
connection)
39 − P: Pt 100
N: Ni 120
40 − E: The electrical cabinet is equipped with a heat
exchanger. The heat exchanger serves to maintain
a constant temperature in the electrical cabinet.
A: An additional electrical cabinet (with additional
motor and temperature channels) can be
connected.
B: Heat exchanger and additional electrical cabinet
are present.
VBN w/o Control System
Description
is supplied for the gun solenoid valves.
DC
E 2008 Nordson Corporation