Cleaning Filter Cartridge - Nordson VersaBlue VBN 50 Manual

5-14
Maintenance
Filter Cartridge
Replacing Filter Cartridge
Size 24
1
2
Fig. 5-13
1 Filter screw
2 O-ring
3 Thread
Fig. 5-14
P/N 7146386A
(contd.)
(contd.)

Cleaning Filter Cartridge

1. Disassemble the filter cartridge.
2. Use a cleaning agent to remove any adhesive residue that can not be
removed mechanically.
3. Always follow the manufacturer's instructions when using cleaning
agents!
3
2 4
4 Filter sheath
5 Filter screen
Assembling Filter Cartridge
1. Clamp the filter screw vertically in a vice.
2. Carefully inspect O-rings; replace if necessary.
3. Assemble the individual parts (Refer to illustration above).
4. Screw the nut (6, Fig. 5-13) onto the thread (3, Fig. 5-13) by hand. Use
caution to prevent the filter screen from jamming.
5. Tighten with a torque wrench (size 16).
Torque 14 Nm / 124 lbin.
6. Secure with a locknut; use a torque wrench (size 13).
Torque 24 Nm / 212 lbin.
NOTE: Nordson recommends using a second wrench to brace the nut and
prevent it from turning.
VBN w/o Control System
6
5
Size 13
6 Nut
7 Hexagon nut (locknut)
E 2008 Nordson Corporation
Size 16
2
7