Introduction; Intended Use; Area Of Use (Emc); Operating Restrictions - Nordson VersaBlue VBN 50 Manual

Adhesive melters vbn without controller

Table of Contents

E 2008 Nordson Corporation

Adhesive melters of the series VersaBlueR may be used only to melt and

convey suitable materials, e.g. thermoplastic hot melt adhesives.

Any other use is considered to be unintended. Nordson will not be liable for

personal injury or property damage resulting from unintended use.

Intended use includes the observance of Nordson safety instructions.

Nordson recommends obtaining detailed information on the materials to be

used.

In regard to electromagnetic compatibility (EMC), the melter is intended for

use in industrial applications.

When operated in residential or commercial areas, the melter may cause

interference in other electrical units, e.g. radios.

VBN w/o Control System

Introduction

Section 2

Introduction

P/N 7146386A

2-1

Table of Contents