3-8
Installation
Connecting Hose
Connecting Electrically
2
3
1
Fig. 3-7
Melter (for each tank)
-XS17
Fig. 3-8
P/N 7146386A
Also refer to the hose manual.
1. First connect the hose (3) electrically to the unit.
Use hose receptacles XS10 to XS17 (Fig. 3-8, bottom row) for the plugs of
the hoses.
NOTE: For more than one hose: Every hose connection is allocated to a
corresponding receptacle. Do not mistakenly exchange!
Refer to wiring diagram for connecting arrangement.
Ni 120
-XS17
-XS10
VBN w/o Control System
Pt 100
-XS10
E 2008 Nordson Corporation