The Locate Client Screen - Netscout AirCheck G2 User Manual

Locating an Access Point, Client, or Interferer
increases (i.e., as you are moving closer to the AP). The sound
icon displays in the screen header when sound is On.
External Antenna Icon: Press this button to turn the
External Antenna on or off. The external antenna is On when
the icon displays in the screen header, as shown in Figure 47.

The Locate Client Screen

The following information shows on the Locate Client
screen:
Screen Title: Shows the Client's MAC address. The address
starts with a vendor abbreviation prefix, if the prefix is
available. See "How to: Load the latest list of vendor
prefixes into the Tester," page 89.
MAC Address: The client's MAC address.
Last Seen: The time elapsed since the client was last
detected.
Signal Strength Meter: Visually displays the client's real-time
signal level reading.
Figure 47. Locate Client Screen
67