Target Tests - Netscout AirCheck G2 User Manual

Figure 41. The Connect to AP Test Results

Target Tests

Default Gateway: Indicates whether or not the configured
gateway could be successfully pinged.
DHCP Server: Indicates whether or not the DHCP server
could be successfully pinged.
DNS1 and DNS2: Indicate whether the primary (DNS1) and
secondary (DNS2) DNS servers could be successfully pinged.
(User-Definable) Targets: Indicates whether or not the user-
configured test targets could be successfully pinged or
reached with a TCP Port Open test.
NOTE: The default target is www.google.com, but you
can add and edit test targets.
TCP Port Open Test Targets," page 56.
Link-Live Upload: Indicates whether the Tester was able to
upload the current test results to a Link-Live account.
"Getting Started in Link-Live Cloud Service," page 46.
PHY Data Rate: The highest measured physical transmit
data rate.
NOTE: If the Tester roams to a new AP after a connection
test has completed, a data rate of -- will be displayed.
The -- indicates that AirCheck G2 is not currently
transmitting Wi-Fi data and a data rate cannot be
obtained.
60
Verifying Connectivity and Coverage
See "Defining Ping and
See