Locate Client Screen - Netscout AirCheck G2 User Manual

The strength of the signal from the access point. The

display shows "---" if the tester cannot hear the access
point.
A graph of the signal strength over time. If the tester

cannot hear the access point, the line does not show.
A gauge that shows the signal strength at the current

time. The bar is gray if the tester cannot hear the access
point.
The channel that the access point uses. The

color of the bars shows the status of the country code
for the regulatory domain. See
Thresholds for Test Ratings and Colored Bar Graphs,
page 13.
The number of access points that the tester has

found. This number does not include virtual access
points if Group virtual access points is selected. See
page 25.
Press Mute to turn off the sound.


See "Changing the
A
B
E
Figure 27. Locate Client Screen
The MAC address of the client. The address starts with a

vendor abbreviation prefix, if the prefix is available. See
"oui_abbr.txt" on page 65.
The name, channel, and frequency of the access point

that the client uses for the network connection.
The strength of the signal from the client. The display

shows "---" if the tester cannot hear the client.
The channel that the tester is monitoring for locating.

To change this channel, press
57
Locating an Access Point or a Client
G H I
.
 
C
F
ffy18.eps