Netscout AirCheck G2 User Manual page 43

Figure 15. Client Details Screen
Security: Shows the security type for the client-AP
connection. The field will be blank if the client is not
associated with an AP, is using an ad-hoc connection, or its
security standard is unknown.
802.11 Type: The 802.11 type that the client is using:
802.11a: Uses the 5-GHz band.
802.11b: Uses the 2.4-GHz band.
802.11g: Uses the 2.4-GHz band.
802.11n: Can be used in the 2.4 GHz or 5 GHz bands.
802.11ac: Uses the 5-GHz band.
Band: Shows the Wi-Fi band of the client connection.
Channel: The primary channel the client is using. Select this
field to open the Channel Details screen for more
information about this primary channel.
Last Seen: Shows the time when the last packet from the
client was detected.
Probes For: Shows the SSID from the last probe request. The
field is populated only for non-associated clients; it is blank
for associated clients.
Locate: Touch this button to open the Locate screen and
begin locating the client.
Client, or Interferer," page 64.
30
Discovering Clients
See "Locating an Access Point,