How To: Transfer A Profile From A Pc To The Tester - Netscout AirCheck G2 User Manual

Figure 34. Profiles > Save As
b. Touch Name and use the on-screen keyboard to
type in a new name.
c. Touch DONE when finished.
 To save a Secured Profile:
a. Touch the down arrow to change the default Type
from Open to Secured.
b. Touch Password to enter a password on the on-
screen keyboard.
Ensure that you enter the password as you intend it.
Touch the open lock icon to double-check that it is
correct. If you enter the password incorrectly here, or
forget the password, you may not be able to access
your Secured Profile again.
c. Touch DONE when you finish entering the
password.
 Touch Apply when you finish configuring the Profile.

How to: Transfer a Profile from a PC to the Tester

NOTE: See the AirCheck G2 Manager Help
additional instructions.
1 Use the Profile Setup in AirCheck G2 Manager to make a
Profile.
2 Connect the Tester to the PC using the USB cable
supplied.
3 Wait for AirCheck G2 Manager to show a
"Connected" indicator at the top left.
4 In AirCheck G2 Manager, drag and drop the Profile name
from the right panel, "Local Profiles," to the left panel,
"AirCheck G2 Profiles" to transfer the Profile to the
Tester.
53
Customizing the Tester for your Network
Caution
for
green