Next Steps - Netscout AirCheck G2 User Manual

Next Steps

After running Connection tests, the AirCheck G2 Tester
displays the buttons to start a Network Roaming Test or AP
Range Test.
On the completed Connect to AP screen

press Range Test to begin a range test for the AP. 
See "Performing an Access Point Range Test," page 77.
On the completed Connect to Network test screen

(Figure 44), press Roaming Test to begin a roaming test
for the network. See "Performing a Network Roaming
Test," page 73.
On either the Connect to Network or AP test screens,

press iPerf Test to initiate iPerf performance testing.
"Conducting iPerf Performance Testing," page 80.
Press the Log button to see details about the connection

procedure.
Press the Save button to save the test results to a

session file. See "Saving Sessions and Packet Captures,"
page 85.
(Figure 41),
See
63
Verifying Connectivity and Coverage