Conducting Iperf Performance Testing; How To: Run An Iperf Test; The Select Iperf Server Screen - Netscout AirCheck G2 User Manual

C
XVI. ONDUCTING I
The iPerf Test is a standardized network
performance tool used to measure UDP or TCP
capacity and throughput. The AirCheck G2 can
perform iPerf testing with either a NETSCOUT Test
Accessory or iPerf server software installed on a PC
as the test endpoint.
NOTE: If you are using an iPerf server installed on a
PC as the endpoint, iPerf Version 3.1 or newer is required.
You can download it at this URL:

How to: Run an iPerf test

Once AirCheck G2 has finished
Network or Connect to AP
appears at the bottom of the Connect to Network and AP
screens (Figure 41 and Figure
1 Touch the iPerf Test button to open the Select iPerf
Server screen.
2 Either manually enter your iPerf server's IP address or
select a discovered Test Accessory from the Available
iPerf Remotes list to populate the iPerf Server field.
3 Once your iPerf Server is selected and its IP address
displayed in the top field, touch the Start button at the
bottom of the screen to begin the iPerf test. The scan
does not need to be complete.
P P
ERF ERFORMANCE
https://iperf.fr
Running a Connect to
Test, the iPerf Test button
44).
T
ESTING

The Select iPerf Server Screen

Figure 57. Select iPerf Server Screen
80

Conducting iPerf Performance Testing