Netscout AirCheck G2 User Manual page 109

Transmit Probes
Default AP
Authorization
Allows you to enable or disable the Transmit Probes feature. Transmit
Probes is On by default. Toggle the On/Off switch to Off to turn it off.
With the Transmit Probes feature enabled, AirCheck G2 will transmit
generic probe requests for any networks to find hidden networks and
detect APs more quickly than just listening for beacons, under these
conditions:
 AirCheck G2 will not transmit when it is on the
Locate
Client screens.
 AirCheck G2 will only transmit probe requests for the legal channels in the
country for which it is currently configured.
 AirCheck G2 will only transmit probe requests on channels on which it has
discovered one or more APs.
 AirCheck G2 will transmit probe requests at power levels that are legal for
the country for which it is currently configured.
Allows you to change the default AP Authorization Class that is assigned
to all APs without an individual, manually user-assigned Authorization
Class.
Touch the drop-down arrow to switch from the None designation to either
Authorized , if you want all APs to have the Authorized class by
default, or to Unknown
unless they have an individual assigned class.
Locate
, if you want all APs to show as Unknown
96
All AirCheck G2 Settings
Discovery
Access Point or