The Interferer Event Details Screen - Netscout AirCheck G2 User Manual

Locate: Touch this button to open the Select Interferer

screen and then begin locating an interferer type.
"Locating an Access Point, Client, or Interferer," page
64.
Refresh: Touch this icon to clear the current

results and restart the scan.
Touching the
unsaved test results.
Save: Touch this button to save a session file

containing the discovery or test results that have
been collected since the AirCheck G2 last
refreshed. See "Saving Sessions and Packet
Captures," page 85.
To open the Details screen for an interferer event, touch its
row.
Caution
Refresh button will erase all

The Interferer Event Details Screen

See
The Interferer Event Details screen shows the following
detailed information about the interferer you have selected:
Event Number: The number of the event as assigned by the
AirCheck G2.
Type: The type of interfering device detected by AirCheck G2.
Average Power: The average observed power output in
dBm of the interfering device.
Peak Power: The highest observed power output in dBm of
the interfering device.
Duty Cycle: The percentage of time, during the most recent
sample, for which the interferer was detected.
Channels Impacted: The channel numbers for the channels
affected by the interferer.
Number Channels Impacted: How many channels are
impacted by the detected interferer.
34
Detecting Interferers