802.11 Settings - Netscout AirCheck G2 User Manual

802.11 Settings

These settings control how the Tester scans, displays, and transmits network data.
NOTE: Be sure to touch Apply to save your changes for each option on this screen.
802.11 Setting
Channels and Bands
MAC Address Format
SSID Filtering
Description
Allows you to select which band(s) and/or which channel(s) AirCheck G2
scans, the frequency at which they are scanned, and the time duration for
which each channel(s) in the selected band(s) is scanned.
NOTE: Turning Off band and/or channel scanning affects Air Quality and
Network Tests.
Allows you to decide the format of MAC addresses shown in the MAC and
BSSID fields. Touch the down arrow
 OUI compact colon format, e.g., Vendor:33:44:55. This is the default.
 MAC colon format, e.g., 00:11:22:33:44:55.
llows you to enable or disable SSID filtering and to select which SSIDs to
A
filter.
When this feature is On, and the Show Listed SSIDs radio button is

selected, only listed SSIDs and access points for those SSIDs will be
captured and displayed.
When this feature is On, and the Exclude Listed SSIDs radio button is

selected, all but the listed SSIDs and access points for those SSIDs will
be captured and displayed.
to select either of the following:
94
All AirCheck G2 Settings
Associated Tester
Functions
Networks, Channels,
Access Points, and
Clients; AutoTest
Access Points and
Clients
Networks and Access
Points