How To: Load A Profile That Is Saved In The Aircheck G2 Tester; How To: Delete A Profile On The Tester; Adjusting The Test Thresholds - Netscout AirCheck G2 User Manual

NOTE: You must Load the Profile on the Tester before
you can use it.
How to: Load a Profile that is saved in the AirCheck G2
Tester
1 From the Home Screen, touch the
2 Touch Profiles.
3 Touch Load, and select a Profile name from the list.
4 Touch Apply.
5 Enter the password if the Profile is secured.

How to: Delete a Profile on the Tester

1 Select Settings > Profiles.
2 Select Delete.
3 Select the Profile you want to delete.
NOTE: You cannot delete the currently active Profile.
4 Touch Apply.
5 Confirm that you want to delete by touching Yes.

Adjusting the Test Thresholds

The AirCheck G2 Tester illustrates the status of your network
using red, green, and

Settings button.


The colored ratings for test results on the AirCheck G2 are
based on Thresholds. The Tester compares measured data
with the configured thresholds to determine whether a result
receives a Pass, Warning, or Fail rating. These ratings are set
by default on the AirCheck G2 Tester, but you can adjust
them for your own network testing needs.
54
Customizing the Tester for your Network
yellow
Colored bar graphs:
Pass/ Warning/
Other test result fields that turn red, green, or
for example, in AutoTest results:
Figure 35. AutoTest Air Quality Results Screen
colors in the following ways:
Fail ratings
yellow,