Link-Live Settings - Netscout AirCheck G2 User Manual

Brightness: Increases or decreases the brightness of the
screen. NOTE: You can help extend the battery life by
decreasing screen brightness.
Auto-Shutoff: Enables or Disables Auto-Shutoff on AirCheck
G2 based on the specified period of inactivity. 
NOTE: Auto-Shutoff is disabled when the Tester unit is
plugged into AC power.
Remote User Interface: Allows access to AirCheck G2
Tester's UI from a remote machine loaded with a VNC client.
See "Using the Remote Interface," page 88.
Restore Factory Defaults: Restores AirCheck G2 to its
factory default settings and erases all data.
Factory Defaults," page 108.
Restoring factory defaults erases all saved test data,
screen captures, log files, and Profiles from the
AirCheck G2 device.
Export Troubleshooting Log: Exports the troubleshooting
log file to an external USB drive.
Link-Live: Enables or disables automatic upload of files to
the Link-Live Cloud Service. To enable automatic upload, you
must first Claim your AirCheck G2 Tester in Link-Live. 
See "How to: Claim the AirCheck G2 to Link-Live," page 46.
See "Restoring
Caution
Clear Browser Cookies: Deletes any web browser cookies
from a Captive Portal that were saved on the unit while
connecting to a network or AP.

Link-Live Settings

Figure 67. Link-Live Settings Screen
MAC Address: This field shows the MAC address of the
AirCheck G2 Tester unit.
Claim Unit: You must touch this button during the process to
claim the Tester in Link-Live Cloud Service.
Link-Live Connection: Toggle this field On or Off to enable
or disable automatic uploading of test results from the Tester
to Link-Live Cloud Service.
NOTE: If this setting is Off, the AirCheck G2 will not scan
for or display Test Accessories from Link-Live on the
105
All AirCheck G2 Settings