16 INPUT CONFIGURATION MENU: (INP.CNF)
INP.CNF
INP.CNF
(Input Configuration)
L IN.FRE
(Line Frequency in Hz)
Press 'MENU'
Press 'RESET/ENTER'
Press 'MENU'
16.1 L IN.FRE
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
Input Configuration Menu
ENTER INPUT CONFIGURATION MENU:
Ad.RAtE
(Analog to Digital Rate)
1) Three times though Main Menu items and display shows "INP.CNF".
2) Display shows "L IN.FRE" Line Frequency submenu.
3) Scroll through the following sequence of available Input Configuration
Menu selection menu: "L IN.FRE", "Ad.RAtE", "MOdE", and "IN.SC.OF"
(Line Frequency, Analog to Digital Rate, Input Mode and Input Scale &
Offset).
Enter POWER LINE FREQUENCY SELECTION SUBMENU:
To enter POWER LINE FREQUENCY SELECTION Submenu if display
shows "L IN.FRE".
4) Display shows flashing "60" in Hz (default) or previous frequency
selection.
5) Scroll through the 2 supported selections to the Frequency of your
power line type: "60" or "50" Hz.
6) Display advances to "Ad.RAtE" Analog to Digital Rate Submenu. If a
change was made, the controller will also show "StOREd" stored
message momentarily.
MOdE
16
IN.SC.OF
(Input Scale & Offset)
59