Omega DP41-B User Manual page 82

20
Output Configuration Menu
MOdE
Press 'RESET/ENTER'
Press 'RESET/ENTER'
OUt.tyP
Press 'RESET/ENTER'
OUt.tyP
(Output Type)
UNFILt
(Unfiltered)
Press 'RESET/ENTER'
Press ' /MAX'
72
Enter OUTPUT MODE CONFIGURATION SUBMENU:
5) Display shows "StOREd" stored message momentarily and advances
to "MOdE" to allow users to select Output type as Voltage (0-10Vdc or
Current (4-20mA-dc) source.
6) Display flashes "VOLt" (default) DC-Voltage output option or previous
selection ("CURRNt" DC-Current output).
Enter OUTPUT TYPE CONFIGURATION SUBMENU:
7) Display shows "OUt.tyP" Output Type Submenu.
FILtRd
(Filtered)
8) Display flashes "UNF ILt" Unfiltered option or previous selection.
9) Scroll though and select the following options for your choice of setting:
"UNF ILt" :Transmits the unfiltered value of your signal input.
"FILtRd" : Transmits the filtered value of your signal input.
"PEAk" : Transmits the recorded Peak "HI RdG" Reading value(s).
or
"VALLy" : Transmits the recorded Valley "LO RdG" Reading value(s).
PEAk VALLy