Section 28 Display Color Selection Menu: (Color); N.color Enter Normal Color Submenu; Sp1.Clr Enter Setpoint 1 Color Submenu; Sp2.Clr Enter Setpoint 2 Color Submenu - Omega DP41-B User Manual

28 DISPLAY COLOR SELECTION MENU: (COLOR)
COLOR
Press 'MENU'
28.1 N.COLOR
Press 'RESET/ENTER'
Press 'RESET/ENTER'
Press ' /MAX'
28.2 SP1.CLR
Press 'RESET/ENTER'
Press 'RESET/ENTER'
Press ' /MAX'
28.3 SP2.CLR
Press 'RESET/ENTER'
28.4 AL1.CLR
28.5 AL2.CLR
Display Color Selection Menu
Enter COLOR SELECTION MENU:
1) Nine times, if Communication Option Board installed, otherwise just
eight times. Display shows "COLOR" Color Selection Menu that allows
user to select the color of the LED display for either normal mode or
under alarmed condition.
Enter NORMAL COLOR SUBMENU
2) Display shows "N.COLOR" Normal Color submenu that allows user to
change normal Display's color. If necessary to access the other following
submenus: "SP1.CLR", "SP2.CLR", "AL1.CLR" or "AL2.CLR". Use or
Press 'MENU' button.
3) Display flashes "GREEN" Green color (default) or previous selection.
4) Scroll through the available following colors: "GREEN", "REd" or
"AMbER" for your color choice of Display.
• The four following menus allow the user to change the color of display
when setpoint is reached or alarm is triggered.
Enter SETPOINT 1 COLOR SUBMENU
5) Display shows "StOREd" stored momentarily and advances to "SP1.CLR"
Setpoint 1 Color submenu.
6) Display flashes "HOLd" Hold option (default), which causes the display
color remains the same as the setpoint reached, or previous selection.
7) Scroll and select the following available options: "HOLd", "GREEN",
"REd" or "AMbER" for your choice of display color.
Enter SEPOINT 2 COLOR SUBMENU
8) Display shows "StOREd" stored momentarily and advances to "SP2.CLR"
Setpoint 2 Color submenu.
• The menu items and configuration steps of following submenus:
"SP2.CLR" Setpoint 2 Color submenu
Enter ALARM 1 COLOR SUBMENU "AL1.CLR"
Enter ALARM 2 COLOR SUBMENU "AL2.CLR"
"AL1.CLR" and "AL2.CLR" are identical to the above "SP1.CLR" Setpoint 1
Color submenu steps. Therefore refer it as the example for setting
Display Color Functions.
28
97