Table of Contents
Advertisement
5.3
Input Configuration
In process mode, the SP-014 can accept up to three 0-24 mA, 0-1.0 V
mode, the SP-014 can accept one process input and one digital pulse input. In all modes, the general Discrete I/O
may be configured. These modes are detailed in the below sections.
5.3.1 Process Inputs Interface
The following process input configuration options are available in both process only and mixed input mode: 4-
20 mA current loop, 0-1.0 V voltage input, 0-2.0 V voltage input. Current loop readings are rounded to the
nearest 0.1 mA and voltage readings are rounded to the nearest 10 mV.
To configure the process inputs, follow the steps below:
Step 1: Click the Inputs configuration tab on SYNC and choose from Single, Dual, or Triple Process with or
without DIO in the Type dropdown.
Step 2: Click on each input channel and choose between the mA and mV options from the Device Range/Type
drop-down. Click Apply Settings when done.
Figure 8: SYNC interface triple process without DIO configuration
, or 0-2.0 V
process inputs. In Mixed Input
DC
DC
11 |
M 5 7 5 2
Advertisement
Table of Contents
