Input Configuration; Pressure - Omega SP-006 User Manual

Layer n pressure monitoring and control smart probe

Table of Contents

• BaudRate: Controls bits per second

• DataBits: The number of bits in each character sent.

• Parity: A means of checking the correctness of a character by adding an extra bit to the character and setting

the value based on all the other bits in the character.

• StopBits: The number of bits used to indicate the end of the character.

Once you have completed setting the communication parameters for your device, click Finish.

5.3

Input Configuration

The SP-006 provides readings for pressure, temperature, and discrete I/O (DIO). To use these features, click the

Inputs configuration tab on SYNC and choose your preferred input mix from the Type dropdown. The SP-006 allows

selecting pressure and discrete I/O only or pressure, temperature, and discrete I/O.

The SP-006 Pressure readings are fixed based on the specific model. The user may calibrate the Pressure

sensor using Single or Dual-Point calibration by clicking the Calibration button.

Figure 7: SYNC interface pressure input

10 |

M 5 7 7 9

Table of Contents