Input Configuration; Temperature, Humidity, And Barometric Pressure (Sp-003 Only); Dewpoint, Humidex, And Heat Index Sensor (Sp-003-2 And Sp-004-2 Only); Temperature And Humidity Interface (Sp-004 Only) - Omega SP-003 User Manual

5.3

Input Configuration

The SP-003 provides input readings for Temperature, Humidity, and Barometric Pressure with the SP-003-2 and SP-
004-2 also offering Dewpoint, Humidex, and Heat Index readings.

Temperature, Humidity, and Barometric Pressure (SP-003 Only)

To configure these inputs, click the Inputs configuration tab on SYNC and choose your preferred input
sensor mix from the Type dropdown.

Dewpoint, Humidex, and Heat Index Sensor (SP-003-2 and SP-004-2 only)

The SP-003-2 and SP-004-2 add Dewpoint, Humidex, and Heat Index sensor readings in addition to
temperature, humidity, and barometric pressure. To access the dewpoint, Humidex, or Heat index
sensor through SYNC, click the Inputs configuration tab and choose the input sensor mix that
includes DP (Dewpoint) or aH (Apparent Heat = Humidex and Heat Index).

Temperature and Humidity Interface (SP-004 Only)

The SP-004 provides readings for temperature and humidity only. The SP-004-2 adds Dewpoint, Humidex,
and Heat Index sensor readings in addition to Temperature and Humidity readings. To configure these
features, click the Inputs configuration tab on SYNC and choose your preferred input sensor mix from the
Type dropdown.
Figure 6: SP-003-2 inputs configuration interface
Figure 7: SP-004 input configuration interface
12 | M 5 7 4 8