Fls.dsp Enter Flashing Display Control Submenu; Bright Enter Display Brightness Control Submenu - Omega DP41-B User Manual

14.5 FLS.dSP
FLS.dSP
(Flashing Display)
Press 'RESET/ENTER'
Press 'RESET/ENTER'
Press 'MENU'
Press ' /MAX'
Press 'RESET/ENTER'
14.6 bRIGHt
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
Reading Configuration Menu
Enter FLASHING DISPLAY CONTROL SUBMENU:
SP1.FLS
(Setpoint Flashing)
SP2.FLS
AL1.FLS
(Alarm 1 Flashing)
AL2.FLS
23) Display shows "SP1.FLS" Setpoint 1 Flashing.
24) Display flashes "dISAbL" disable (default) or previous selection of
control option.
25) Scroll though next available Setpoint/Alarm Display Flashing
selections: "SP1.FLS", "SP2.FLS", "AL1.FLS" and "AL2.FLS".
26) Display flashes "ENAbLE" or "dISAbL", select your choice of control.
27) Display advances to next Setpoint/Alarm Display Flashing or "bRIGHt"
Display Brightness Control Menu. If a change was made, the controller will
also show "StOREd" stored message momentarily.
Enter DISPLAY BRIGHTNESS CONTROL SUBMENU:
28) Display flashes "H.bRt" High Brightness Level.
29) Scroll though 3 different Display brightness level: "H.bRt" (high),
"M.bRt" (medium) and "L.bRt" (low) and select your choice of brightness
level.
30) Display advances to "INP.CNF" Input Configuration Menu. If a change
as made, the controller will also show "StOREd" stored message
momentarily.
14
ENAbLE
dISAbL
ENAbLE
dISAbL
ENAbLE
dISAbL
ENAbLE
dISAbL
57