Filter Enter Filter Configuration Submenu - Omega DP41-B User Manual

14
Reading Configuration Menu
14.4 FILtER
Press 'RESET/ENTER'
Press 'MENU'
CNt by
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
FILt.tP
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
FILt.Tm
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
56
Enter FILTER CONFIGURATION SUBMENU:
12) Display shows "CNt by" Counter by or round-off feature. To enter,
Press 'RESET/ENTER').
13) Scroll through 3 available selections of Filter configuration: "CNt by",
"FILt.tP" and "FILt.tM". Refer to the flowchart below.
Enter COUNT BY FILTER FUNCTION MENU:
14) Display flashes "001" (default) or previous setting value.
15) Scroll though 7 available selections: 001, 002, 005, 010, 020, 050 and
100 for your choice of setting.
16) Display advances to "FILt.tP" Filter Type Selection Menu. If a change
was made, the controller will also show "StOREd" stored message
momentarily.
Enter FILTER TYPE SELECTION MENU:
17) Display flashes "A.b.C.F IL" Adaptive Bandwidth Control Filter.
18) Scroll through 2 supported types: "A.b.C.F IL" or "MOV.AVE" (Moving
Average) for your desired option.
19) Display advances to "FILt.tM" Filter Type Selection Menu. If a change
was made, the controller will also show the "StOREd" stored message
momentarily.
Enter FILTER TIME SETTING MENU:
20) Display flashes "004" (default) or previous setting value.
21) Scroll though 8 available selections: 001, 002, 004, 008, 016, 032,
068 and 128 for your choice of setting.
22) Display advances to "FLS.dSP" Flashing Display Setting Menu. If a
change was made, the controller will also show the "StOREd" stored
message momentarily.