Unt.tmp Enter Temperature Unit Selection Submenu; Dec Pt Enter Decimal Point Configuration Submenu - Omega DP41-B User Manual

Universal input meter
Hide thumbs Also See for DP41-B:
Table of Contents

Advertisement

14.2 UNt.tMP
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
14.3 dEC Pt
dEC.Pt
(Decimal Point)
Press 'RESET/ENTER'
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
Press 'RESET/ENTER'
Press ' /MAX'
Press 'RESET/ENTER'
For TC and RTD inputs. Only the following Decimal Point selections are available:
Reading Configuration Menu
Enter TEMPERATURE UNIT SELECTION SUBMENU:
1) To enter TEMPERATURE UNIT SELECTION Submenu if display shows
"UNt.tMP" (Second Item of "RdG.CNF" Menu).
2) Display shows flashing "C" (default) and front display shows °C
accordingly at the bottom right side or previous temperature Unit
selection.
3) Scroll through the 3 supported selections to the Temperature Unit of
your choice: "C", "F" and "k" (°C, °F and °K units).
4) Display advances to "dEC Pt" Decimal Point Setting Menu. If a change
was made, the controller will also show the "StOREd" stored message
momentarily.
Enter DECIMAL POINT CONFIGURATION SUBMENU:
dP.ACt V
(Decimal Point Active)
(Decimal Point Setting)
5) Display shows "dP.ActV" Decimal Point Effect Selection menu.
6) Display flashes "yES" (default) as confirming that the decimal point
position is active otherwise "NO" as independent.
7) To scroll or select the desired effect for your setting.
8) Display shows "StOREd" stored message momentarily then advances
to "Set dP" Decimal Point Setting menu.
9) Display shows "FFFFFF" (default) no decimal point option or previous
selection of decimal point location.
10) Scroll through the 6 available selection as 000000, 00000.0, 0000.00,
000.000, 00.0000, and 0.00000 for the suitable choice to match your
selected input range and type.
11) Display advances to "FILtER" Filter Configuration submenu. If a
change was made, the controller will also show "StOREd" stored
message momentarily.
FFFFFF
FFFFF.F
FFFF.FF (least significant digit is an averaged display)
SEt dP
14
yES
NO
FFFFFF
FFFFF.F
FFFF.FF
FFF.FFF
FF.FFFF
F.FFFFF
55

Advertisement

Table of Contents
loading

Table of Contents