Roll Unit Left Covers - Ricoh D124-17 Service Manual

4. Replacement and Adjustment
1. Install the right inner cover first.
2. When you re-install the right outer cover, pull the latch forward slightly before you fasten the cover
with screws.
3. After attaching the cover, pull the latch forward and then release it so that it flips back to the rear.
Do this a few times to make sure that the cover is not blocking the latch movement.
• If the latch does not move freely, remove the cover and re-attach it.
• The latch must move freely so that the roll can be re-installed.

Roll Unit Left Covers

Preparation
• Separate the Main Unit from the Scanner Unit
Remove:
• Rear Cover
• Roll Unit page 295
308
page 234
page 205