Ricoh D124-17 Service Manual page 41

Overview
Three plastic rivet screws hold the operation panel cover in place. These screws can be removed easily
and then reinserted to change the angle of the operation panel (three different positions), to reduce
glare on the operation panel LCD.
3 USB Cable
A USB cable [1] is permanently attached to the back of the operation panel. The end of this USB cable
is plugged into the USB Host slot of the machine controller on the back of the machine. This cable is used
for the scan-to-media feature, where scanned documents can be stored on memory devices inserted into
the side of the operation panel. There are two slots, an SD card slot [2] and a USB memory device slot
[3].
39