Ricoh D124-17 Service Manual page 250

4. Replacement and Adjustment
6. Pull the harnesses away from the FFCs and then disconnect the FFCs ( x5).
• Each FFC is numbered with the number of the CIS unit it is connected to.
7. Disconnect the rear edge [A] of the board ( x3).
8. Use a pair or radio pliers to disconnect the front edge [B] of the board ( x3).
9. Remove the SIB.
10. Each FFC connector slot is marked with the number of CIS element that it connects to. (The example
above shows "CIS 5".)
248