Ricoh D124-17 Service Manual page 553

3. Touch "SP Mode" at the top of the screen, and then adjust these SPs if a measurement is not within
"Standard".
SP
1001-1
1001-2
1001-3
5 ±0.5 mm
1002-1
1002-2
1002-3
Step 7: Scanner Mask Setting
Do these SPs to replace the "0" settings done in Step 5.
Standard:
Print Position Adj (Top Edge) - Bypass Feed
Print Position Adj (Top Edge) - Paper Input 1
Print Position Adj (Top Edge) - Paper Input 2
Print Position Adj (Left Edge) - Bypass Feed
Print Position Adj (Left Edge) - Paper Input 1
Print Position Adj (Left Edge) - Paper Input 2
Special Adjustments
Comments
551