Exit Sensor - Ricoh D124-17 Service Manual

4. Replacement and Adjustment
1. Release the drive gear and remove it, with the timing belt (
2. Push the roller shaft [A] to the right to disengage the right end from the bracket.
3. Lift the roller shaft [B] to remove it.
4. Remove the bushing from the right end of the shaft (

Exit Sensor

Preparation
• Separate the Main Unit from the Scanner Unit
Remove:
• Top cover
• Front cover
342
page 219
page 220
x1, x1).
x1, x1).
page 205