Ricoh D124-17 Service Manual page 393

14. Disconnect the thermistor harness [A] from the old print head unit (removed from the machine) for
re-connection to the new unit.
15. Disconnect the two air sensor harnesses [B] and [C] from the old print head unit (removed from the
machine) for re-connection to the new unit.
• When you discard the old unit, always obey local laws and regulations regarding the
disposal of such items.
16. Check the paper under the carriage unit. If it is stained with ink remove it, and then replace it with a
fresh sheet of paper.
New Black Print Head Unit Installation
Follow the removal procedure in reverse to install the new black print head unit., but please pay
attention to these important points during the installation procedure.
Carriage Unit
391