Ricoh D124-17 Service Manual page 730

2. Appendix 2: Service Program Mode
28 Applying Size 4/Rem7/Thick 2
1835 Paper Thickness Correction DFU
[0 to 1/0/1]
1 Special/Thin
2 Special/Normal
3 Special/Semi Thick
4 Special/Thick 1
5 Special/Thick 2
1850 Paper Feed Start Timing (Size1) DFU
This SP code is used to adjust the registration roller start timing for roll paper Size 1
based on the amount of paper remaining on the roll.
1 Remaining: less than 10%
[0 to 1000/400/1 msec]
2 Remaining: 10< to 20%
[0 to 1000/400/1 msec]
3 Remaining: 20< to 30%
[0 to 1000/400/1 msec]
4 Remaining: 30< to 40%
[0 to 1000/400/1 msec]
5 Remaining: 40< to 60%
[0 to 1000/400/1 msec]
6 Remaining: 60< to 80%
[0 to 1000/400/1 msec]
7 Remaining: 80< to 100%
[0 to 1000/400/1 msec]
26