Ricoh D124-17 Service Manual page 867

Sets the length of time to determine the length of an unattended paper jam.
[03 to 30/1]
This setting is enabled only when SP5508-4 is enabled (set to 1).
12 Jam Detection Continuous Count
Sets the number of continuous paper jams required to initiate a call.
[02 to 10/1]
This setting is enabled only when SP5508-4 is enabled (set to 1).
13 Door Open: Time Length
Sets the length of time the remains opens to determine when to initiate a call. This setting is
enabled only when SP5508-4 is enabled (set to "1").
[03 to 30/1]
SC/Alarm Setting
With NRS (New Remote Service) in use, these SP codes can be set to issue an SC call
5515
when an SC error occurs. If this SP is switched off, the SC call is not issued when an SC
error occurs.
1 SC Call
2 Service Parts Near End Call
3 Service Parts End Call
4 User Call
[0 to 1/1/1] 0: Off 1: On
6 Communication Test Call
7 Machine Information Notice
8 Alarm Notice
[0 or 1/1/1 ] 0: Off 1: On
9 Non-Genuine Toner Alarm
10 Supply Automatic Ordering Call
11 Supply Management Report Call
SP5000
163