Ricoh D124-17 Service Manual page 907

SMTP Auth Direct Sending
Occasionally, all SMTP certifications may fail with SP5860 006 set to "2" to enable
encryption during SMTP certification for the SMTP server. This can occur if the SMTP
server does not meet RFC standards. In such cases you can use this SP to set the SMTP
certification method directly. However, this SP can be used only after SP5860 003 has
been set to "1" (On).
25
Bit0: LOGIN
Bit1: PLAIN
Bit2: CRAM_MD5
Bit3: DIGEST_MD5
Bit4 to Bit 7: Not Used
S/MIME: MIME Header Settings
Selects the MIME header type of an e-mail sent by S/MIME.
[0 to 2/0/1]
26
0: Microsoft Outlook Express standard
1: Internet Draft standard
2: RFC standard
S/MIME: Authentication Check
28
Determines whether the destination is authenticated for sending S/MIME mail.
[0 to 1/0/1] 0: No Checking 1: Checking
E-Mail Report
5866
This SP controls operation of the email notification function.
1 Report Validity
Enables or disables the e-mail notification to @Remote.
[0 or 1/0/1 ]
0: Enable, 1: Disable
5 Add Date Field
Disables and re-enables the addition of a date field to the email notification.
[0 to 1/0/1]
SP5000
203