Ricoh D124-17 Service Manual page 577

16. Touch [Offline], and then press
17. Go back into the printer SP mode and set the setting back to the default (00000000). Be sure the
press to save the setting.
18. Switch the machine off and remove the SD card.
Error messages
If an error occurs, pressing "OK" will cause the device to discard the job and return to standby.
Error
Card not found
Init error
No memory
Other error
Write error
to exit Card Save mode.
Card cannot be detected in the slot.
A card save process (e.g. card detection, change to kernel mode) failed to
initialize.
Insufficient working memory to process the job.
An unknown error occurred.
Failed to write to the card.
System Maintenance Tasks
Meaning
575