Ricoh D124-17 Service Manual page 97

Table of Contents

Advertisement

Main Machine Installation
5. Open the harness clamps [A] (
x2).
6. Connect the relay harness [B] (
x1).
7. Insert the 6-pin connector of the harness into [A] at CN125 on the PSU.
8. Insert the 19-pin connector of the harness into [B] at CN201 on the MCU.
9. Close the harness clamps (
x2).
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mo-c1D124-21D124-27

Table of Contents