Ricoh D124-17 Service Manual page 637

31 Other Error
An unexpected error occurred while data was being converted. This error is the
same as SC991. See SC991 below.
Data encryption conversion errors
SC859 B
Data encryption on the HDD failed.
01 HDD encrypted data restoration error
Data could not be restored after encryption.
• HDD connection loose, broken, defective
• Format HDD
• HDD defective
02 Power interrupt error
Power supply was interrupted during data encryption.
• Cycle the machine off/on
08 HDD Check Error
Data conversion was attempted with no HDD unit present.
• Confirm that HDD unit installed correctly
• Initialize HDD with SP5832-1
Note: After installation, a new HDD should be formatted with SP5832-1
09 Power Loss During Data Conversion
Data conversion stopped before NVRAM/HDD data was converted.
• Format HDD with SP5832-1
10 Data Read Command Error
More than two illegal DMAC communications were returned.
• HDD defective
• Format HDD with SP5832-1
• Replace HDD
SC800: Firmware
CTL
635