Ricoh D124-17 Service Manual page 773

[0 to 65 535/0/1 pulse]
15 Feeler Position: Sucking HT4
[0 to 65 535/0/1 pulse]
16 Feeler Position: Sucking HT5
[0 to 65 535/0/1 pulse]
17 Flattering Range after Acceleration
[0 to 100/50.8/0/1 mm]
18 Flattering Range after Deceleration
[0 to 100/0/0.1 mm]
2303 Sucking after Ink End - Sucking Feeler Travel I DFU
This SP affects the operation of the ink supply pumps after a cartridge runs out of ink.
[0 to 10/1.5/0.01 mm]
2306 OCFS Position Check Repeat
Use these SP codes to check the tank-full position of the OCFS after ink end or removal
of a paper jam.
0: Check not needed
1: Check needed
1 H1
2 H2
3 H3
4 H4
[0 to 1/0/1]
2307 Add Supply Unit Reversal Rotate DFU
1 Supply Pump Suspended Time
SP2000
69