Ricoh D124-17 Service Manual page 825

8 Contrast: 1-255
Sets the overall contrast of images scanned in the Text/Photo mode.
[1 to 255/128/1]
1 (Weakest), 128 (Medium: Default), 255 (Strongest)
Note: Raising the contrast level may increase moiré
9 Ind Dot Erase: 0(Off) 1-7 (Weak-Strong)
Sets the level of independent dot erasure to improve the appearance in the backgrounds
of images scanned in the Text/Photo mode.
[0 to 7/0/1]
0: Default (Off) 1 (Weakest) to 7 (Strongest)
4555 Scan Apli:Photo DFU
These SP codes enhance the quality of originals scanned in the Photo mode (selected on
the operation panel).
5 MTF: 0(Off) 1-15 (Weak-Strong)
Sets the MTF coefficient scanned in the Photo mode. When the original image is
converted to electrical signals, the contrast is reduced due to the influence that adjacent
white and black pixels have on one another as a result of CIS properties. This may cause
very narrow bands or spacing between black and white areas. Use the MTF adjust to
correct this problem and emphasize image detail.
[0 to 15/8/1]
0 (Weakest), 8 (Medium: Default), 15 (Strongest)
6 Smoothing: 0(x1) 1-7 (Weak-Strong)
Sets the level of smoothing for originals scanned in the Photo mode.
[0 to 7/4/1]
0 (Weakest), 4 (Medium: Default), 7 (Strongest)
7 Brightness: 1-255
Sets the overall brightness images scanned in the Photo mode.
[1 to 255/128/1]
1 (Weakest), 128 (Medium: Default), 255 (Strongest)
Note: Raising the brightness level may increase moiré
SP4000
121