Ricoh D124-17 Service Manual page 896

2. Appendix 2: Service Program Mode
Delivery Error Display Time
Use this setting to determine the length of time the prompt message is displayed when a
6
test error occurs during document transfer with the NetFile application and an external
device.
[0 to 999/300/1 second /step]
IP Address (Secondary)
Specifies the IP address assigned to the computer designated to function as the
8
secondary delivery server of Scan Router. This SP allows only the setting of the IP
address without reference to the DNS setting.
Range: 000.000.000.000 to 255.255.255.255
Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
[0 to 4/ 0/1 /step]
0: Unknown
9
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
Delivery Svr Capability
Changes the capability of the registered that the I/O device registered.
[0 to 255/0/1 /step]
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address possible
Bit5 = 1 Mail RX confirmation setting possible
10
Bit4 = 1 Address book automatic update function exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender exists
Bit0 = 1 Sender specification required (if set to 1, Bit6 is set to "0")
192