Ricoh D124-17 Service Manual page 939

7724 Supply After Time Out
This SP displays a count for the number of times a timeout occurred for an ink supply
motor during the ink fill sequence.
• A timeout occurs when the machine fails to detect the feeler at the OCFS or if the ink
pump fails to supply ink.
• The feeler must change its position within t_sec after the pump starts pumping ink.
• If the feeler does not change position, the machine issues one timeout.
• The machine will allow up to 6 timeouts before the machine issues SC293 and the
ink filling sequence halts.
1 Reverse Success Count HT1
Count for K1.
[0 to 999999/0/1]
2 Reverse Success Count HT2
Count for K2.
[0 to 999999/0/1]
3 Reverse Success Count HT3
Count for C.
[0 to 999999/0/1]
4 Reverse Success Count HT4
Count for Y.
[0 to 999999/0/1]
5 Reverse Success Count HT5
Count for M.
[0 to 999999/0/1]
7725 Air Purge Filling After Leftover
Idle Time 1
These SP codes display the number of air purge/ink fill executions after all print heads
have remained idle for a time specified (Idle Time 1) after the last printed sheet exits and
the print heads are capped.
SP7000
235