Teltonika RUT955 User Manual page 95

RUT955 User's Manual
You can configure firewall source NAT rules, by clicking the edit button next to them:
Field Name
1. Name
2. Protocol
3. Source zone
4. Source MAC address
5. Source address
6. Source port
Teltonika Solutions
Sample value
Rule's name
All protocols / TCP / UDP /
TCP+UDP / ICMP / Custom
Any zone / gre / hotspot /
l2tp / lan / pptp / vpn / wan
Any MAC address
Any IP address or range
Any port
Explanation
Name of the rule, used for easier management
Protocol of the packet that is being matched against
traffic rules
Match incoming traffic from the selected zone only
Match incoming traffic from these MACs only
Match incoming traffic from this IP or range only
Match incoming traffic originating from the given source
port or port range on the client host only
95