Teltonika RUT955 User Manual page 119

RUT955 User's Manual
9.4.1.2 MQTT Bridge
The MQTT Broker also supports a functionality called Bridge. An MQTT Bridge is used for the communication of two
MQTT Brokers. The window of Bridge parameters is presented below. Some of these are mandatory as they are needed
to create a connection: Connection Name, Remote Address and Remote Port. For more information on MQTT Bridge
parameters you can read the official mosquitto.conf manual page.
Field name Possible Values
1. Enable Checked/Unchecked
2. Connection Any name
Name
3. Remote Address Any remote IP address
4. Remote Port 0 – 65535
5. Use Remote Checked/Unchecked
TLS/SSL
6. Use Remote Checked/Unchecked
Bridge Login
7. Topic Any existing Topic name
8. Try Private Checked/Unchecked
9. Clean Session Checked/Unchecked
Teltonika Solutions
Explanation
Enable MQTT Bridge
Name of the Bridge connection. Although this is used for easier
management purposes, this field is mandatory
Remote Broker's address
Select which port the broker should use to listen for connections
Select this to use TSL/SSL certificates of the remote broker
Select this to use Remote login data. If checked, you will be
prompted to enter a remote client ID, username and password
Enter the names of the Topics that your Broker will subscribe to
Check if the remote Broker is another instance of a daemon
Check to discard session state after connecting or disconnecting
119