Wireless; Wireless Access Point - Teltonika RUT955 User Manual

RUT955 User's Manual

7.5 Wireless

The Wireless configuration window provides you with the possibility to configure your wireless access points and
wireless stations. The Wireless Station Mode will become active only when Wi-Fi is configured as an active WAN
interface (either main or backup.)
Above is the overview of the Wireless Configuration window. It displays active access points and stations. Here you
can disable or enable your Wi-Fi interfaces, remove unwanted access points or stations or enter a configuration window
for each Wi-Fi, where you can configure it more thoroughly.
7.5.1

Wireless Access Point

The Wireless Access Point configuration window is used to make changes to different access points. It is divided
into two main sections – device and interface. One is dedicated to configuring hardware parameters, the other –
software. To access this window, simply click the 'edit' button next to the Wi-Fi interface that you wish to configure:
7.5.1.1 Device Configuration
The Device Configuration section is used for configuring Wi-Fi hardware parameters.
7.5.1.1.1 General Setup
Here you can toggle the availability of the wireless radio and the physical channel frequency.
Teltonika Solutions
81