Dynamic Routes - Teltonika RUT955 User Manual

RUT955 User's Manual
7.7.1.1 Static ARP entries
Static ARP entries are used to bind a MAC address to a specific IP address. For example, if you want some device to
get the same IP every time it connects to the router, you can create a Static ARP entry by binding that device's MAC
address to a desired IP address. The router will then create an entry in the ARP table, which in turn make sure that that
device will get the specified IP address every time.
7.7.2

Dynamic Routes

7.7.2.1 General
Dynamic routing enables the router to select paths according to real-time logical network layout changes.
Field name
1. Enable
2. Router ID
Teltonika Solutions
Value
Enable/Disable
192.168.1.1
Explanation
Enable dynamic routes
Router's ID
103