Lan; Configuration - Teltonika RUT955 User Manual

RUT955 User's Manual

7.3 LAN

This page is used to configure the LAN network, where all your devices and computers that you connect to the
router will reside.
7.3.1

Configuration

7.3.1.1 General Setup
Field name
1. IP address
2 IP netmask
3. IP broadcast
7.3.1.2 Advanced settings
Field name
1. Accept router
advertisements
2. Override MTU
3. Use gateway metric
4. Use WAN port as LAN
Teltonika Solutions
Sample value Explanation
192.168.56.1 IP address that the router uses on the LAN network
255.255.255.0 A mask used to define how "large' the LAN network is
192.168.56.255 IP broadcasts are used by BOOTP and DHCP clients to find and
send requests to their respective servers
Possible values Explanation
Enable/Disable When enabled, this function allows accepting router
advertisements (disabled by default)
0 - 1500 MTU (Maximum Transmission Unit) specifies the largest
possible size of a data packet
Any integer The LAN configuration generates an entry in the routing table.
number In this field you can alter the metric of that entry. Higher metric
means higher priority
Enable/Disable Lets you use the WAN port as if it were a LAN port
75