Restore Point; Restore Point Create; Restore Point Load - Teltonika RUT955 User Manual

RUT955 User's Manual
In Script Management window is shown content of a file /etc/rc.local. This file is executed at the end of startup,
executing the line: sh /etc/rc.local In this script is needed to use sh (ash) commands. It should be noted, that this is
embedded device and sh functionality is not full.

10.5 Restore point

10.5.1

Restore point create

Allow to create firmware restore points with all custom configurations. You can download created restore points
to your computer.
10.5.2

Restore point load

Allow to restore configuration from previously saved restore point. You can upload restore point from your
computer.
Teltonika Solutions
220