Setting Up Your Router; Installation; Front Panel And Back Panel - Teltonika RUT955 User Manual

RUT955 User's Manual

3 Setting up your router

3.1 Installation

After you unpack the box, follow the steps documented below in order to properly connect the device. For better
Wi-Fi performance, put the device in a clearly visible spot, as obstacles such as walls and doors hinder the signal.
1. First assemble your router by attaching the necessary antennas and inserting the SIM card(s).
2. To power up your router, please use the power adapter included in the box (IMPORTANT: using a
different power adapter can damage and void the warranty for this product).
3. If you have a wired broadband connection you will also have to connect it to the WAN port of the router.
3.1.1

Front Panel and Back Panel

1,2,3 LAN Ethernet ports
4 WAN Ethernet port
5,6,7 LAN LEDs
8 WAN LED
9 RS485 connector
10 Power socket
11 RS232 connector
12 Inputs and outputs connector
13 Power LED
14 Connection LED
15 Signal strength LED
To find out your router's modem brand, check the bottom of your router. You should find a sticker containing
information about the router (Serial, IMEI, LAN MAC, etc.). The first line is the router's product code. The seventh
symbol of the code indicates the router's modem:

Quectel: A, H, J, K, L, M, P

Huawei: 1, 3, 5, 7, 9, B, F

Telit: 0, 2, G
Below is an example of a sticker with a Huawei modem (the modem symbol is highlighted in yellow)
Teltonika Solutions
1 LTE auxiliary antenna connector*
2 GPS antenna connector
3 LTE main antenna connector*
4 USB connector
5,7 WiFi antenna connectors
6 Reset button
*LTE main/aux antenna connector positions
depend on the router's modem:
Quectel: 1 – MAIN; 3 - AUX
Huawei: 1 – AUX; 3 - MAIN
Telit: 1 – AUX; 3 – MAIN
13