Teltonika RUT955 User Manual page 59

RUT955 User's Manual
7.1.1.1 Passthrough Mode
Passthrough mode is used to redirect all traffic to another device. In the process the router itself becomes
"transparent" as all traffic is redirected to another device which will also have the router's public IP address assigned to
it.
Field name Possible values
DHCP mode* Static
Dynamic
No DHCP
*Using Passthrough Mode will disable most of the router's capabilities!
Teltonika Solutions
Explanation
The Static mode requires that you enter your computer's MAC address
(xx:xx:xx:xx:xx:xx) and select a lease time (expiration time for the leased address.)
The device will get an IP address from your GSM operator. Other devices that are
connected to the router will get IP addresses from the router's DHCP server, but
they will not have internet access
In Dynamic mode the GSM operator will connect to the router first and give out an
IP address to your computer. When using Passthrough in Dynamic mode, the
router's LAN DHCP server will be disabled, but it will enabled again automatically
when you switch to a different mode
In No DHCP mode the IP address, subnet mask, default gateway and DNS from the
GSM operator will have to be entered on your computer manually. When using
Passthrough in No DHCP mode, the router's LAN DHCP server will be disabled, but
it will become enabled automatically when you switch to a different mode
59