Teltonika RUT955 User Manual page 140

RUT955 User's Manual
Field name
1. Enable
2. IKE version
3. Mode
4. Type
5. My identifier type Address / FQDN /
6. My identifier
7. Force
encapsulation
8. Dead Peer
Detection
9. Pre shared key
10. Remote VPN
endpoint
11. IP address /
Subnet mask
12. Enable keep alive
13. Host
14. Ping period (sec)
Teltonika Solutions
Possible values Explanation
Checked/Unchecked Turns IPsec on or off
IKEv1 or IKEv2 Method of key exchange
Main / Aggressive ISAKMP phase 1 exchange mode
Tunnel / Transport Type of connection
The type of identifier used to establish a connection with another IPsec
User FQDN instance
Depends on In case RUT has a Private IP, its identifier should be its own LAN
identifier type network address. In this way, the Road Warrior approach is possible
Checked / Force UDP encapsulation for ESP packets even if no NAT situation is
Unchecked detected
Checked / The values clear, hold and restart all activate DPD
Unchecked
Any string A shared password to authenticate between the peers
Host's address IP address or hostname of the remote IPsec instance
IP address/[0 - 32] Remote network secure group IP address and mask used to determine
to what subnet an IP address belongs to. Should differ from device's
LAN IP
Checked/Unchecked Enable tunnel keep alive function
Host's address A host address to which an ICMP echo requests will be sent
0 - 9999999 Send ICMP echo request every x seconds
140